Safe use of gas-liquid pressurized cylinder operation

The gas-liquid pressurized cylinder when pressure is applied to a small area on the piston, resulting in a high pressure. A two five ventilation control valve, booster pump to achieve continuous operation. Gas-liquid pressurized cylinder when in use must pay attention to the following points, in order to make use of the gas-liquid pressurized cylinder is smoother, but also extend its life.

A supercharger system uses the power source is generally filtered and dry compressed air (40micron);

2, for the sake of the stability of the source of stress is generally recommended that the installation of a gas barrel, between the FRL and the pressurization system in order to achieve the best output state;

3, the pressurization system used in a temperature range of -5 to +60 ° C, if you need a special occasion (Environment), please specify;

4, in order to achieve the best air quality, it is recommended to use automatic drain FRL (not self-lubrication to oil);

5, the hydraulic oil pressure cylinder use, we recommend using ISO VG 68 # (some products with ISO VG32 #)

6, it is recommended that before the inlet of the pressurized section of the installation of an attached backstop-type pressure regulator to reduce the output pressure, ie, to achieve the required work to contribute to, so as not to contribute too much waste of supplies, reduce die life can energy conservation;

7, pressurized cylinder installation flange plate is fixed, the output axis is down. Please specify if you need special installation;

These several elements in the operating gas-liquid pressurized cylinder can be safely used. Related recommendation: C type hydraulic machine ?? Rotating hydraulic cylinder http://www.ktchyd.cn

keywords: C-type hydraulic press, rotating hydraulic cylinder,